Sun Roller Blind Clip
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Clip for a VW T3 Dehler Profi sun roller blind. Printed it with TPU so it is flexible. PLA would warp in the car at high heat. ABS could also work but that would be too stiff for me. When printing with TPU make sure to print slowly with little cooling! An enclosure of the printer is not necessary. UPDATE 20.12.2020 Version 2 is shorter
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Clip for a VW T3 Dehler Profi sun roller blind. Printed it with TPU so it is flexible. PLA would warp in the car at high heat. ABS could also work but that would be too stiff for me. When printing with TPU make sure to print slowly with little cooling! An enclosure of the printer is not necessary. UPDATE 20.12.2020 Version 2 is shorter
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Sun Roller Blind Clip
1979-1992 Volkswagen T3 T3 (Dehler Profi)
by Digga79
May 5, 2026
Loading pricing...