Quarter Panel Side Moulding
1983-1987 Toyota Corolla Ae86 AE86
Description
These are side moulding pieces for the AE86's front and rear quarter panels. The cover picture is a pair of printed front side mouldings above a pair of factory rear mouldings. If there is interest I will use the files to create the section that goes on the door as well once my car is back from paint. I personally wasn't sure what material would work well for holding paint. The factory items can clearly be painted and are a bit flexible. I ended up going with ASA and made them solid so that I could sand the subtle gradients without being nervous about sanding down into the infill. Again, car is at the paint shop so I don't know if that was a good idea on not just yet :S
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These are side moulding pieces for the AE86's front and rear quarter panels. The cover picture is a pair of printed front side mouldings above a pair of factory rear mouldings. If there is interest I will use the files to create the section that goes on the door as well once my car is back from paint. I personally wasn't sure what material would work well for holding paint. The factory items can clearly be painted and are a bit flexible. I ended up going with ASA and made them solid so that I could sand the subtle gradients without being nervous about sanding down into the infill. Again, car is at the paint shop so I don't know if that was a good idea on not just yet :S
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed