Central Console Instrument Panel Plates
1983-1992 Volkswagen Golf MK2
Description
This is a 3D-Printable plate for the centralconsole of the Golf/Rabbit Mk2. Best choise for adding instruments to your Golf/Rabbit ! Normal instruments are 52mm (2 Inch). There are several versions. Please contact me if you have any ideas or suggestions on this ;) Screws needed are 3-4mm (1/10inch - 1/6inch) plastic or sheetscrews First of all print the holders and the alignment-plate. Screw the holders to the alignment-plate (you need to gauge them to fit to the alignment-plate). Then stick the plate into the console as shown on the pictures and screw the holders to the central console (ratchet or short screwdriver needed). Remove the alignment-plate and screw on the plate you want. You can also use the alignment-plate as a pattern to use wood or such. Have fun. Edit. Actually put that in my car LOL. Works nice :D
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a 3D-Printable plate for the centralconsole of the Golf/Rabbit Mk2. Best choise for adding instruments to your Golf/Rabbit ! Normal instruments are 52mm (2 Inch). There are several versions. Please contact me if you have any ideas or suggestions on this ;) Screws needed are 3-4mm (1/10inch - 1/6inch) plastic or sheetscrews First of all print the holders and the alignment-plate. Screw the holders to the alignment-plate (you need to gauge them to fit to the alignment-plate). Then stick the plate into the console as shown on the pictures and screw the holders to the central console (ratchet or short screwdriver needed). Remove the alignment-plate and screw on the plate you want. You can also use the alignment-plate as a pattern to use wood or such. Have fun. Edit. Actually put that in my car LOL. Works nice :D
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed