Armrest Filler
1984-1989 Chevrolet Corvette C4
Description
This armrest filler features a thicker bottom to help prevent the warping and cracking that the stock ones suffer from. I know there are some other versions of this file out there already so this one will be a freebie! FEATURES And DIMENSIONS -Fits 1984-1989 Chevrolet Corvette C4 INSTALLATION NOTES -This is pretty simple, if you can get the old one out, then you can get the new one in. WHAT’S INCLUDED -1 STL file for the drivers side and 1 STL file for the passenger side. NOTES -Results may vary depending on printer settings and filament used PRINT RECOMMENDATIONS -Material: High temp filament of your choice to prevent warping in the high temp car cabin. -PLA suitable for test fitting only -Walls: 3+ for strength -Supports: NONE -Orientation: See photo in listing POST-PROCESSING -Light sanding may improve finish -Optional: primer/paint as desired
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This armrest filler features a thicker bottom to help prevent the warping and cracking that the stock ones suffer from. I know there are some other versions of this file out there already so this one will be a freebie! FEATURES And DIMENSIONS -Fits 1984-1989 Chevrolet Corvette C4 INSTALLATION NOTES -This is pretty simple, if you can get the old one out, then you can get the new one in. WHAT’S INCLUDED -1 STL file for the drivers side and 1 STL file for the passenger side. NOTES -Results may vary depending on printer settings and filament used PRINT RECOMMENDATIONS -Material: High temp filament of your choice to prevent warping in the high temp car cabin. -PLA suitable for test fitting only -Walls: 3+ for strength -Supports: NONE -Orientation: See photo in listing POST-PROCESSING -Light sanding may improve finish -Optional: primer/paint as desired
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed