Dash Mount Repair Plate
1984-1996 Chevrolet Corvette C4
Description
My dash's mounting area decided to fall apart, so I made this simple repair patch that holds the dash in place and allows the headlight switch to function. I figured someone else may find it helpful, so I'm posting it here. You'll need to trim the piece to match the remaining intact portion of your dash. Once you do, it should have the correct spacing to keep everything in place. I used JB-Weld Plastic Weld on both sides to secure mine to the remaining plastic, and propped the dash up and clamped the plate in place until it cured. Settings used on my Ender 3 V2: Nozzle: 0.4mm Material: PLA Infill: 100% Resolution: 0.28mm
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
My dash's mounting area decided to fall apart, so I made this simple repair patch that holds the dash in place and allows the headlight switch to function. I figured someone else may find it helpful, so I'm posting it here. You'll need to trim the piece to match the remaining intact portion of your dash. Once you do, it should have the correct spacing to keep everything in place. I used JB-Weld Plastic Weld on both sides to secure mine to the remaining plastic, and propped the dash up and clamped the plate in place until it cured. Settings used on my Ender 3 V2: Nozzle: 0.4mm Material: PLA Infill: 100% Resolution: 0.28mm
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed