Cup Holder
Description
I decided to make this as I hated the aftermarket cup holder that goes over the handbrake. This design requires 3 holes to be drilled into the center console for fitment. When in place it sits over the transfer case selector lever so is only usable when in 2WD. Having slots for the screws to sit in, it simply lifts up and out of the way when 4WD is required. This should fit most, if not all standard UK fast food cup sizes but was designed with McDonalds large cups as my template with wriggle room. The largest base of as cup it could take is 65mm.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I decided to make this as I hated the aftermarket cup holder that goes over the handbrake. This design requires 3 holes to be drilled into the center console for fitment. When in place it sits over the transfer case selector lever so is only usable when in 2WD. Having slots for the screws to sit in, it simply lifts up and out of the way when 4WD is required. This should fit most, if not all standard UK fast food cup sizes but was designed with McDonalds large cups as my template with wriggle room. The largest base of as cup it could take is 65mm.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed