Center Console Divider
1984-1989 Nissan 300zx Z31
Description
This is version 1 of a quick-draft for a little divider for the center console of a Z31 300ZX. The divider is designed to work in conjunction with the cup holder that Wesley Darnell designed which be found at the following link. (Good job Wesley!) https://www.thingiverse.com/thing:5527155 This builds a small divider wall that used the existing back wall of the console to create a mini compartment and keep items from rolling to the area where you would set your cups or bottles. This also locks the cupholder insert in place because Z31's have all the torques and you don't want your drinks to slide backwards after all. You can see a quick Google photo vid of it being installed here: https://photos.app.goo.gl/BZdhd1WpH4pRJXxK7 Possibly not 100% perfect, but it's definitely usable and close enough fer Gub'ment work! Might make a version 2 at some point.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is version 1 of a quick-draft for a little divider for the center console of a Z31 300ZX. The divider is designed to work in conjunction with the cup holder that Wesley Darnell designed which be found at the following link. (Good job Wesley!) https://www.thingiverse.com/thing:5527155 This builds a small divider wall that used the existing back wall of the console to create a mini compartment and keep items from rolling to the area where you would set your cups or bottles. This also locks the cupholder insert in place because Z31's have all the torques and you don't want your drinks to slide backwards after all. You can see a quick Google photo vid of it being installed here: https://photos.app.goo.gl/BZdhd1WpH4pRJXxK7 Possibly not 100% perfect, but it's definitely usable and close enough fer Gub'ment work! Might make a version 2 at some point.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed