Double Din Radio Bezel
1984-1989 Nissan 300zx Z31
Description
I heard it wasn't possible to put a double DIN radio in a 300zx so I made this. To install you will have to modify the support structure for the radio, but it really isn't difficult. The climate control can stay stock in its original location with this installed. I also included models of the bezel that have been cut down so that it can be printed on smaller printers (like mine). In these small pieces there is holes on each connecting section where you can install tubing to increase the rigidity of the bond.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I heard it wasn't possible to put a double DIN radio in a 300zx so I made this. To install you will have to modify the support structure for the radio, but it really isn't difficult. The climate control can stay stock in its original location with this installed. I also included models of the bezel that have been cut down so that it can be printed on smaller printers (like mine). In these small pieces there is holes on each connecting section where you can install tubing to increase the rigidity of the bond.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed