Parcel Shelf Rear Clip
1984-1989 Nissan Z31 Z31
May 7, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Rev3 design to improve strength and prevent breakage in the common areas. This is for any 84-89 Nissan Z31 that had the parcel shelf option between the rear strut towers. The photo shows a early print done with PLA and it did sag a bit where i did not have adequate cooling.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Rev3 design to improve strength and prevent breakage in the common areas. This is for any 84-89 Nissan Z31 that had the parcel shelf option between the rear strut towers. The photo shows a early print done with PLA and it did sag a bit where i did not have adequate cooling.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed