Radio Bezel
1985 Toyota Mr2 AW11
Description
This was designed to go together with my other model for the radio mounting brackets with my radio that I have in my MR2. If you have a different radio and/or use different mounting brackets, then download the model without the radio hole and put your own hole in it. Use screws to install. I don't know what the pitch on the screws are, they look like drywall screws, but the ones on the top are quite short.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This was designed to go together with my other model for the radio mounting brackets with my radio that I have in my MR2. If you have a different radio and/or use different mounting brackets, then download the model without the radio hole and put your own hole in it. Use screws to install. I don't know what the pitch on the screws are, they look like drywall screws, but the ones on the top are quite short.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed