Radio Mounting Panels
1985 Toyota Mr2 AW11
Description
These plates are designed to mount a BOSS 625UAB to the center console radio hole of my 1985 Toyota MR2. My car did not come with any sort of radio in the hole, and there were just a bunch of loose wires and 4 holes that would hold up the mounting hardware if I had it. The screw holes are inset to fit the right size screw flush with the surface, but I don't know what the screw size is since the guy from Tacoma Screw didn't write the part number on the sample bag that he gave me for the free screws (shoutout to Tacoma Screw). If you have a different radio then you may need to adjust hole positioning/size or drill holes with a power drill, but if you do that then these brackets should in theory fit any single-din radio since the flanges allow them to mount to the center console mount holes.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These plates are designed to mount a BOSS 625UAB to the center console radio hole of my 1985 Toyota MR2. My car did not come with any sort of radio in the hole, and there were just a bunch of loose wires and 4 holes that would hold up the mounting hardware if I had it. The screw holes are inset to fit the right size screw flush with the surface, but I don't know what the screw size is since the guy from Tacoma Screw didn't write the part number on the sample bag that he gave me for the free screws (shoutout to Tacoma Screw). If you have a different radio then you may need to adjust hole positioning/size or drill holes with a power drill, but if you do that then these brackets should in theory fit any single-din radio since the flanges allow them to mount to the center console mount holes.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed