Radiator Pedestal Bushing
1986 Toyota Supra
Description
This is a direct fitment radiator lower mount bushing for the mk3 Supra. It likely fits other Toyotas of similar age. Radiator mount bushings are pretty close to all the same roughly. This is to be printed using TPU. Melting point of TPU is well above the normal radiator operating temperatures of 180-220f. I have test fitted it into the frame but have yet to install the radiator or print it in TPU yet. I started with ABS to test fit. So I don't have any print recommendations for the bushings other than I would imagine the infill will likely need to be high due to the TPU softness. I plan on trying 30% first and may end up as high as 80%, I don't know to be honest.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a direct fitment radiator lower mount bushing for the mk3 Supra. It likely fits other Toyotas of similar age. Radiator mount bushings are pretty close to all the same roughly. This is to be printed using TPU. Melting point of TPU is well above the normal radiator operating temperatures of 180-220f. I have test fitted it into the frame but have yet to install the radiator or print it in TPU yet. I started with ABS to test fit. So I don't have any print recommendations for the bushings other than I would imagine the infill will likely need to be high due to the TPU softness. I plan on trying 30% first and may end up as high as 80%, I don't know to be honest.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed