Washer Fluid Cap
1989-1994 Nissan 200sx S13
Description
I am designed another S13 washer fluid cap because what I found there on Thingiverse, isn't fit. So if you have S13 and the measured diameter what is shown on the picture is 57-57,4mm, this cap fits for you. I am printed it with ABS and heated the link between the cap and holder ring, to fold it together, but PETG works better I think. There is two versions, one with logo on the top, and one without. <p>The design is inspired by user: <a href="https://www.thingiverse.com/firejackal/about"> Michael Smyer</a>.</p> <p>He designed the cap for S14: <a href="https://www.thingiverse.com/thing:3135620"> 240SX (S14) Windshield Washer Reservoir Cap V2</a></p>
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I am designed another S13 washer fluid cap because what I found there on Thingiverse, isn't fit. So if you have S13 and the measured diameter what is shown on the picture is 57-57,4mm, this cap fits for you. I am printed it with ABS and heated the link between the cap and holder ring, to fold it together, but PETG works better I think. There is two versions, one with logo on the top, and one without. <p>The design is inspired by user: <a href="https://www.thingiverse.com/firejackal/about"> Michael Smyer</a>.</p> <p>He designed the cap for S14: <a href="https://www.thingiverse.com/thing:3135620"> 240SX (S14) Windshield Washer Reservoir Cap V2</a></p>
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed