Door Speaker Adapter
1989-1999 Toyota Mr2 SW20
Description
This are adapters to fit 165mm speakers into the Toyota MR2 doors. They are designed as high as possible to fit relatively big speaker chassis behind the original doorboards without change the OEM look of the door. You will have to trimm the plastic braces around the speaker at the backside of your doorboards to fit this adapters. No metalwork needed! There is a left and a right version, marked with L and R at the backward mounting hole. The mounting clips are also included, in case your old ones are messed up. Since these things are used in a car, I recommand a heat-resistant material.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This are adapters to fit 165mm speakers into the Toyota MR2 doors. They are designed as high as possible to fit relatively big speaker chassis behind the original doorboards without change the OEM look of the door. You will have to trimm the plastic braces around the speaker at the backside of your doorboards to fit this adapters. No metalwork needed! There is a left and a right version, marked with L and R at the backward mounting hole. The mounting clips are also included, in case your old ones are messed up. Since these things are used in a car, I recommand a heat-resistant material.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed