Hood Prop Retaining Clip
Description
Had to shave off a little of the original design to fit on my 1990 Ford Mustang GT Vert as my hood prop retainer mounting location is 7.6mm wide and the print came out at around 7.9. Total print height came out at 12.6mm which is what the slicer said it should be so think my car just might be a little different for the mounting location size. This version is a pretty snug fit on mine, I also added the angles to help with the initial guiding in since it's a pretty tight fit still near the end. --- # Tinkercad This is a remix of https://www.thingiverse.com/thing:2750733 done via Tinkercad. **Link:** https://www.tinkercad.com/things/jUJ8eBhWTOH-1990-ford-mustang-hood-prop-retainer **Notes:** The objects have been left ungrouped so you can reposition if needed for additional clearance.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Had to shave off a little of the original design to fit on my 1990 Ford Mustang GT Vert as my hood prop retainer mounting location is 7.6mm wide and the print came out at around 7.9. Total print height came out at 12.6mm which is what the slicer said it should be so think my car just might be a little different for the mounting location size. This version is a pretty snug fit on mine, I also added the angles to help with the initial guiding in since it's a pretty tight fit still near the end. --- # Tinkercad This is a remix of https://www.thingiverse.com/thing:2750733 done via Tinkercad. **Link:** https://www.tinkercad.com/things/jUJ8eBhWTOH-1990-ford-mustang-hood-prop-retainer **Notes:** The objects have been left ungrouped so you can reposition if needed for additional clearance.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed