Window Crank
1990 Mazda Mx-5
Description
Mazda Mx5 Na window crank shaped like the OEM before the restilyng. IMPORTANT: it must be assembled as in the photos. It is assembled using an M4 low cap steel bolt with a hex socket. The lever knob comes together but doesn't turn very well. you have to force it in and turn it and after a while it works. It was a work in progress until I discovered aliexpress. If you like this part please tip me I will use your donation to support my Mx5 build. If you have question or you want to see my Mx5 search " nomoney_miata " on Instagram. Thanks
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Mazda Mx5 Na window crank shaped like the OEM before the restilyng. IMPORTANT: it must be assembled as in the photos. It is assembled using an M4 low cap steel bolt with a hex socket. The lever knob comes together but doesn't turn very well. you have to force it in and turn it and after a while it works. It was a work in progress until I discovered aliexpress. If you like this part please tip me I will use your donation to support my Mx5 build. If you have question or you want to see my Mx5 search " nomoney_miata " on Instagram. Thanks
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed