Door Pull
1990-1997 Mazda Miata NA
Description
Mazda Miata Soor Pull (NA) Porsche-style door pulls for your NA Miata This is a snap-style cap and base that does not require any hardware to hold the cap. Additional Resources needed: Adding your color webbing strip for color personalization, the shortest length suggested is 14" as you want enough material to create a loop of 6" and an additional 2" for 1" overlaps for the eye loop to create a little webbing sandwich. Use a 7/8" washer to help keep everything tight. Use a hot knife or similar tool to create the holes needed in webbing. This will seal the webbing and prevent fraying. 2 ea 7/8" flat washers 36" of color webbing can be bought at most local craft stores Print settings: Use PETG or ABS or ASA or stronger material with better heat resistance. Layer Height: 0.20mm base with variable layer height Perimeters: 3 Infill: 15% Gyroid Support: Required
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Mazda Miata Soor Pull (NA) Porsche-style door pulls for your NA Miata This is a snap-style cap and base that does not require any hardware to hold the cap. Additional Resources needed: Adding your color webbing strip for color personalization, the shortest length suggested is 14" as you want enough material to create a loop of 6" and an additional 2" for 1" overlaps for the eye loop to create a little webbing sandwich. Use a 7/8" washer to help keep everything tight. Use a hot knife or similar tool to create the holes needed in webbing. This will seal the webbing and prevent fraying. 2 ea 7/8" flat washers 36" of color webbing can be bought at most local craft stores Print settings: Use PETG or ABS or ASA or stronger material with better heat resistance. Layer Height: 0.20mm base with variable layer height Perimeters: 3 Infill: 15% Gyroid Support: Required
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed