Hood Trim
1990-1997 Mazda Miata NA
Description
Trim part that i recreated from the scan of the other side, should fit nice as in the picture Be careful, radiator hose to overflow may have to be relocated if not OEM (mine's OEM and has no fitting issue on OEM locations) Hood has to be drilled, you could put rivnut insert in the hood and use screws to secure it, or drill it and use plastic trim clips as seen in the picture. I would recommend printing it in PET-G or even ABS (mine's ABS and haven't moved at all after 1 whole year)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Trim part that i recreated from the scan of the other side, should fit nice as in the picture Be careful, radiator hose to overflow may have to be relocated if not OEM (mine's OEM and has no fitting issue on OEM locations) Hood has to be drilled, you could put rivnut insert in the hood and use screws to secure it, or drill it and use plastic trim clips as seen in the picture. I would recommend printing it in PET-G or even ABS (mine's ABS and haven't moved at all after 1 whole year)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed