Cup Holder
1990-1995 Toyota 4runner 2nd Gen
Description
I wanted a bigger cup holder but I don't like paying for 3dprints. So I made one and uploaded it for free. I held it down with some hot glue so it can be removed with Isopropyl alcohol easily. Double side tape could work too but it fits well enough that its not totally necessary... unless you are off-roading. UPDATE: There is a v2 with refined tolerances uploaded, now with a stabilizer around the edge and a pocket in the rear. The cut out it designed to work with my 3d printed switch holder.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I wanted a bigger cup holder but I don't like paying for 3dprints. So I made one and uploaded it for free. I held it down with some hot glue so it can be removed with Isopropyl alcohol easily. Double side tape could work too but it fits well enough that its not totally necessary... unless you are off-roading. UPDATE: There is a v2 with refined tolerances uploaded, now with a stabilizer around the edge and a pocket in the rear. The cut out it designed to work with my 3d printed switch holder.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed