Truck Bed Stake Hole Cover Plug
1992-1997 Ford F-250 OBS
May 9, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
I wanted to cover the stake holes on my OBS F250 truck bed so I made these. They should be tight enough to just wedge in place, though on mine I found that the holes aren't exactly uniform size so I had to print one and make minor tweaks to the sizing for a couple of the holes because one was too tight and one was too loose.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
I wanted to cover the stake holes on my OBS F250 truck bed so I made these. They should be tight enough to just wedge in place, though on mine I found that the holes aren't exactly uniform size so I had to print one and make minor tweaks to the sizing for a couple of the holes because one was too tight and one was too loose.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed