Part Description

These bushings are used to hold the vent tilt position on the Lexus SC300, SC400, and Toyota Soarer. They become brittle over time and crack causing the vent to become loose and droop. These will replace the broken ones assuming the small shaft on the vent is still intact. Use supports on the Bushing Repair file. Check out the assembly guides here: https://drive.google.com/drive/u/0/folders/1FdRl3hD9-SuDZ5RYjdz2Ee0r9JPSFWuu

Print Instructions

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed