Battery Hold-down Clamp
1992-2000 Lexus Sc300/sc400 Z30
Description
Replacement for Lexus PN 74404A, which was missing on my car and which I could not find anywhere. I printed it in carbon filled ABS with 5 perimeters and 30% fill, which is probably overkill, but it's replacing a steel clamp so... You can use your own judgment. I printed mine on my Prusa MK3 and you need a print bed at least that big (250x250mm.) I had to chamfer the corners and print it diagonally to make it fit. You'll have to get your own 5x1.0x25mm screw of your preferred flavor, and a 'J' bolt and nut. I bought a cheap 'universal' hold down kit and adapted the bolt by spreading out the hook end a little and cutting it to length. Or you can try to find Lexus PN 74451B online if you want. I used this one from O'reilly: http://pcx6.2.vu/1 if the link works.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Replacement for Lexus PN 74404A, which was missing on my car and which I could not find anywhere. I printed it in carbon filled ABS with 5 perimeters and 30% fill, which is probably overkill, but it's replacing a steel clamp so... You can use your own judgment. I printed mine on my Prusa MK3 and you need a print bed at least that big (250x250mm.) I had to chamfer the corners and print it diagonally to make it fit. You'll have to get your own 5x1.0x25mm screw of your preferred flavor, and a 'J' bolt and nut. I bought a cheap 'universal' hold down kit and adapted the bolt by spreading out the hook end a little and cutting it to length. Or you can try to find Lexus PN 74451B online if you want. I used this one from O'reilly: http://pcx6.2.vu/1 if the link works.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed