Sleeve Lock Regulator Clip
1992-1997 Subaru Svx
Description
This is a Subaru SVX compatible window sleeve lock regulator clip (related to Subaru part number 62101PA081). Please let me know how this works for you. I will collect feedback and improve the design over time. Note, the part has been re-enforced around a common failure area, and is larger than the original, although this doesn't effect fitment and operation. While it will work if printed in PLA or ABS, I would recommend printing it nylon to match the original. Since printing in nylon isn't super common I've put on one shapeways: https://www.shapeways.com/product/2DFGLG92V/subaru-svx-sleeve-clip-v02-011 The shapeways quality is higher than I've been able to get at home, so I use those on my car.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a Subaru SVX compatible window sleeve lock regulator clip (related to Subaru part number 62101PA081). Please let me know how this works for you. I will collect feedback and improve the design over time. Note, the part has been re-enforced around a common failure area, and is larger than the original, although this doesn't effect fitment and operation. While it will work if printed in PLA or ABS, I would recommend printing it nylon to match the original. Since printing in nylon isn't super common I've put on one shapeways: https://www.shapeways.com/product/2DFGLG92V/subaru-svx-sleeve-clip-v02-011 The shapeways quality is higher than I've been able to get at home, so I use those on my car.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed