Headlight Wiper Blanking Plug
1992-1997 Volvo 850
May 7, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Plug to cover the hole left after removing the headlight wiper mechanisms from a Volvo 850. Print upside down. You may need to sand the holding clip a little to squeeze it in as it is a bit tight but fits snugly. Can be painted but I just sanded the top a little.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Plug to cover the hole left after removing the headlight wiper mechanisms from a Volvo 850. Print upside down. You may need to sand the holding clip a little to squeeze it in as it is a bit tight but fits snugly. Can be painted but I just sanded the top a little.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed