Door Window Molding Clip
1993-1997 Honda Del Sol
Description
This is the clip for the exterior molding at the base of the driver and passenger door windows of the Honda Del Sol. It definitely works on a 1996 model and I think is common to all years. These clips break easily when removing the molding. Replacements are hard to find and expensive (>$5 a piece). There are seven per side. I printed this clip in PETG and it works perfectly. ABS would also probably work. PLA might be a little weak, particularly in hot weather.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is the clip for the exterior molding at the base of the driver and passenger door windows of the Honda Del Sol. It definitely works on a 1996 model and I think is common to all years. These clips break easily when removing the molding. Replacements are hard to find and expensive (>$5 a piece). There are seven per side. I printed this clip in PETG and it works perfectly. ABS would also probably work. PLA might be a little weak, particularly in hot weather.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed