Headlamp Retainer Clip
1993-1998 Jeep Grand Cherokee ZJ
Description
This is the horizontal adjuster retainer for the Jeep Grand Cherokee ZJ headlight. This is designed to replace Mopar Part No. 04762489 . This works flawlessly in my 1994 Jeep GC. I have printed this with the ball socket facing towards the bed with support only for the overhang. You should not need supports for the socket. This was designed with imperial units. If your slicer only supports metrics, be sure to scale your overall height to 19.685mm.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is the horizontal adjuster retainer for the Jeep Grand Cherokee ZJ headlight. This is designed to replace Mopar Part No. 04762489 . This works flawlessly in my 1994 Jeep GC. I have printed this with the ball socket facing towards the bed with support only for the overhang. You should not need supports for the socket. This was designed with imperial units. If your slicer only supports metrics, be sure to scale your overall height to 19.685mm.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed