Side Indicator Gasket
1993-1999 Toyota Celica Gen 6
Description
First attempt at making the rubber gaskets for the side indicators on a Gen 6 Celica (93-99). They all seem to be perished and cracked by now. Printed in black TPU. This was made by tracing the outline on a piece of paper and scanning it. Also by taking measurements of the other dimensions. Have uploaded four designs; the one pictured is the first design. The V2 file is where the dimensions have been changed slightly. The other designs are for a flat version and another with a lower profile lip of only 1mm. 6Nov22 Added a V3; which is a bit of a tidy up and hopefully fits a bit better. Also re-uploaded the flat version; as the original one seemed to have an offset of the center cut-out.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
First attempt at making the rubber gaskets for the side indicators on a Gen 6 Celica (93-99). They all seem to be perished and cracked by now. Printed in black TPU. This was made by tracing the outline on a piece of paper and scanning it. Also by taking measurements of the other dimensions. Have uploaded four designs; the one pictured is the first design. The V2 file is where the dimensions have been changed slightly. The other designs are for a flat version and another with a lower profile lip of only 1mm. 6Nov22 Added a V3; which is a bit of a tidy up and hopefully fits a bit better. Also re-uploaded the flat version; as the original one seemed to have an offset of the center cut-out.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed