Gauge Vent Pod
1994-2001 Audi A4 B5
May 5, 2026
by ebat
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
This replaces any of the center vents (not sure about other vents but probably will) for an a4 b5 and will fit a 52mm gauge. mounts the gauge at a 20 degree angle toward the driver. Fitment is very good, my printer tends to print internal holes on the small size, so those holes are 20 thous. larger than measured. I included the solid part file if you want it.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
This replaces any of the center vents (not sure about other vents but probably will) for an a4 b5 and will fit a 52mm gauge. mounts the gauge at a 20 degree angle toward the driver. Fitment is very good, my printer tends to print internal holes on the small size, so those holes are 20 thous. larger than measured. I included the solid part file if you want it.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed