B Pillar Trim Clip
1994-2001 Bmw 7 Series E38
Description
Replacement clip posts for the upper B pillar trim on E38 BMWs. Must be printed in ABS in order to ABS cement in place. Other plastics and glues may work but it's tough to beat solvent bonding. Instructions: 1. Trim the cross shape features on the trim to 3-5mm high. 2. Fill the bottom of the part with ABS cement 3. Push the part over the trimmed cross features until the bottom surfaces touch 4. With the cement still wet, reinstall the trim into the retaining clips WITHOUT the metal insert. 5. When dry, install the trim with the metal trim retaining clip in place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Replacement clip posts for the upper B pillar trim on E38 BMWs. Must be printed in ABS in order to ABS cement in place. Other plastics and glues may work but it's tough to beat solvent bonding. Instructions: 1. Trim the cross shape features on the trim to 3-5mm high. 2. Fill the bottom of the part with ABS cement 3. Push the part over the trimmed cross features until the bottom surfaces touch 4. With the cement still wet, reinstall the trim into the retaining clips WITHOUT the metal insert. 5. When dry, install the trim with the metal trim retaining clip in place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed