Seat Back Lever Handle
1994-2000 Toyota Rav4 SXA10
Description
Handle for the seat back recline lever of the Toyota RAV4 1st generation. Press-fit onto the lever; if it goes on too easily, you can add some padding underneath. Gluing is probably not recommended, as it may need to be removed to disassemble the seat. Printed in PETG with a 0.5mm nozzle / 0.24mm layer height, speed up to 60mm/s, no supports. No brim/skirt/raft (povidone-iodine adhesive sticks excellently).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Handle for the seat back recline lever of the Toyota RAV4 1st generation. Press-fit onto the lever; if it goes on too easily, you can add some padding underneath. Gluing is probably not recommended, as it may need to be removed to disassemble the seat. Printed in PETG with a 0.5mm nozzle / 0.24mm layer height, speed up to 60mm/s, no supports. No brim/skirt/raft (povidone-iodine adhesive sticks excellently).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed