A-pillar Trim Clip
1995 Bmw 3 Series E36 (318ti)
Description
The BMW e36 A-pillar clips are known to break off, so I made some that will fix it. They are to be epoxied on and might need heat to shape the bottom to contour to the a-pillar trim. ABS is recommended, but I only had PLA. But still works great. The actual car is a 1995 318ti, but should fit other e36's as well. I will be slowly fixing up my brittle interior one piece at a time!
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The BMW e36 A-pillar clips are known to break off, so I made some that will fix it. They are to be epoxied on and might need heat to shape the bottom to contour to the a-pillar trim. ABS is recommended, but I only had PLA. But still works great. The actual car is a 1995 318ti, but should fit other e36's as well. I will be slowly fixing up my brittle interior one piece at a time!
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed