Cup Holder / Cell Phone Tray
1997-2006 Bmw 3 Series E46
Description
For the E46 center console: a cup holder for cans up to 70 mm in diameter, fitting all standard sizes, and a storage compartment for items like a phone, up to 150 x 75 mm. The brackets must be screwed in place or alternatively fixed with a pin (the pin must be glued into the mounts, or the screws must be tightened with nuts in such a way that the bracket can still move freely). Afterward, a rubber band must be stretched around all brackets—insert the rubber band into the slot. This allows cans smaller than 70 mm in diameter to be securely held. If the large part does not fit on your printer, you can print both halves separately and then glue or screw them together.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
For the E46 center console: a cup holder for cans up to 70 mm in diameter, fitting all standard sizes, and a storage compartment for items like a phone, up to 150 x 75 mm. The brackets must be screwed in place or alternatively fixed with a pin (the pin must be glued into the mounts, or the screws must be tightened with nuts in such a way that the bracket can still move freely). Afterward, a rubber band must be stretched around all brackets—insert the rubber band into the slot. This allows cans smaller than 70 mm in diameter to be securely held. If the large part does not fit on your printer, you can print both halves separately and then glue or screw them together.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed