Headlight Hinge Bolt Sleeve
1997-2004 Chevrolet Corvette C5
Description
this kit is for the 1997 - 2004 C5 corvette. no need to spend $50+ USD on replacement kits that don't even include lock nuts this print allows you to upgrade/replace your headlight hinge bolts and NYLON shims to a better more snug fit then OEM! for this project you will need: 4pcs- M5 x16mm bolts (OEM is also M5) 4pcs- M5 lock nuts 4pcs- M6 normal washers make sure they are M6 NOT M5 4pcs- of these 3D printed shims should cost you around $5 and about 15mins to install I recommend printing in ABS but other materials should be fine as well, supports will be needed and infill shouldn't matter too much
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
this kit is for the 1997 - 2004 C5 corvette. no need to spend $50+ USD on replacement kits that don't even include lock nuts this print allows you to upgrade/replace your headlight hinge bolts and NYLON shims to a better more snug fit then OEM! for this project you will need: 4pcs- M5 x16mm bolts (OEM is also M5) 4pcs- M5 lock nuts 4pcs- M6 normal washers make sure they are M6 NOT M5 4pcs- of these 3D printed shims should cost you around $5 and about 15mins to install I recommend printing in ABS but other materials should be fine as well, supports will be needed and infill shouldn't matter too much
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed