Climate Control Knob
Description
This is a climate control knob for an early TJ (Pre-1999) model. If the heater control is a straight line, this is the correct knob (see picture). I imagine this will work with other Chrysler brand vehicles with the same setup. I printed with .1 height, 3 walls, and 25% infill. I find .1 gives a smoother stock finish. There are two variants. With indicator notch, or without. Jeep Early TJ Climate Control knob.stl - Pure black without indicator Jeep Early TJ Climate Control Knob - notched - knob with notch for indicator Jeep Early TJ Climate Control Indicator - indicator you should print in white. The indicator is 97% of the original size. This will allow for placement into the knotch. Scale up/down based upon the dimensional accuracy of your printer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a climate control knob for an early TJ (Pre-1999) model. If the heater control is a straight line, this is the correct knob (see picture). I imagine this will work with other Chrysler brand vehicles with the same setup. I printed with .1 height, 3 walls, and 25% infill. I find .1 gives a smoother stock finish. There are two variants. With indicator notch, or without. Jeep Early TJ Climate Control knob.stl - Pure black without indicator Jeep Early TJ Climate Control Knob - notched - knob with notch for indicator Jeep Early TJ Climate Control Indicator - indicator you should print in white. The indicator is 97% of the original size. This will allow for placement into the knotch. Scale up/down based upon the dimensional accuracy of your printer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed