Cup Holder
1998-2006 Audi Tt 8N MK1
Description
I couldn't upload the STL with the lil wrinkles because it was a bit bigger than the maximum allowed. Here is a link for a folder with ALL the files i made for it and iterations of the model. the final and good one is the one named as 3. UPDATED LINK: https://mega.nz/folder/PANBVKwT#Ju1oHluoNbiNqsoEATbIaw Feel free to use or modify this files any way you want :3 INSTALLATION: This piece goes behing the parking break, replacing that little pannel that gives you access to the boot's emergency release
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I couldn't upload the STL with the lil wrinkles because it was a bit bigger than the maximum allowed. Here is a link for a folder with ALL the files i made for it and iterations of the model. the final and good one is the one named as 3. UPDATED LINK: https://mega.nz/folder/PANBVKwT#Ju1oHluoNbiNqsoEATbIaw Feel free to use or modify this files any way you want :3 INSTALLATION: This piece goes behing the parking break, replacing that little pannel that gives you access to the boot's emergency release
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed