Headlight Upper Mounting Repair Clip
1998-2006 Bmw 3 Series E46
Description
This is a repair clip for the upper portion of the BMW E46 headlights. I have had 3 break on me and didn't want to spend 1-3$ for other peoples models. You may have to grind your headlight down where your tab broke off to fit this properly. Ensure to use a good epoxy, or similar plastic to weld it onto the stock housings. I am unsure of what the stock E46 housings are made of. Printing the clip with that same material and plastic welding it on is the best/most permanent solution.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a repair clip for the upper portion of the BMW E46 headlights. I have had 3 break on me and didn't want to spend 1-3$ for other peoples models. You may have to grind your headlight down where your tab broke off to fit this properly. Ensure to use a good epoxy, or similar plastic to weld it onto the stock housings. I am unsure of what the stock E46 housings are made of. Printing the clip with that same material and plastic welding it on is the best/most permanent solution.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed