Rear Ashtray
1998-2006 Bmw 3 Series E46
Description
Tired of the OEM Rear Ash Tray breaking and giving BMW $80 for an entire unit. Well look no further! You can print yourself a new ashtray in a matter of hours with 30g of filament. EDIT: Solidworks File has been uploaded to Files Quick YT Short on how to seperate once removed from vehicle: 1) Remove two plastic phillips screw clips (will only unfasten so far and then you will pull straight up) 2) pull ashtray away from center console slowly 3) unplug light 4) threw will be 2 clips on either side of ashtray that require seperation shown in YT Video 5) assembly is reverse https://youtube.com/shorts/CdDjTJA5s0w?feature=share
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Tired of the OEM Rear Ash Tray breaking and giving BMW $80 for an entire unit. Well look no further! You can print yourself a new ashtray in a matter of hours with 30g of filament. EDIT: Solidworks File has been uploaded to Files Quick YT Short on how to seperate once removed from vehicle: 1) Remove two plastic phillips screw clips (will only unfasten so far and then you will pull straight up) 2) pull ashtray away from center console slowly 3) unplug light 4) threw will be 2 clips on either side of ashtray that require seperation shown in YT Video 5) assembly is reverse https://youtube.com/shorts/CdDjTJA5s0w?feature=share
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed