Gear Lever Cable Bushing
Description
Small part to fill up the space of a missing gear lever cable bushing for Ford Focus Mk1 Zetec 1.6. It will probably fit a whole more load of car models but that's up to you to research. Obviously print it with 100% infill as it's a constructive part and it takes only 8 minutes to print. I used a zip-tie to prevent it from sliding off the gearbox (small chance that it would without it). Officially a metal C clip should be used to be sure that it will never come off unintended. Outer diameter = 16.125mm, inner diameter = 8.4375mm, height = 12.7mm I've also uploaded the scad file i've made this stl with, but i didn't spend time on actually making it configurable. The FN parameter is just the smoothness of the objects which has no use to adjust. I only uploaded it for backup purposes. If you download OpenSCAD you can tinker with the code.
Print Instructions
No special print instructions provided.
Part Description
Small part to fill up the space of a missing gear lever cable bushing for Ford Focus Mk1 Zetec 1.6. It will probably fit a whole more load of car models but that's up to you to research. Obviously print it with 100% infill as it's a constructive part and it takes only 8 minutes to print. I used a zip-tie to prevent it from sliding off the gearbox (small chance that it would without it). Officially a metal C clip should be used to be sure that it will never come off unintended. Outer diameter = 16.125mm, inner diameter = 8.4375mm, height = 12.7mm I've also uploaded the scad file i've made this stl with, but i didn't spend time on actually making it configurable. The FN parameter is just the smoothness of the objects which has no use to adjust. I only uploaded it for backup purposes. If you download OpenSCAD you can tinker with the code.
Print Instructions
No special print instructions provided.