Climatronic Button Cap
Description
Button cap replacement for Volkswagen Climatronic used in the MK4 Golf/Bora/Jetta (maybe Passat and others from the era). Print on the desired orientation, but depending on it, you will have to use supports or adjust the shrinkage factor on your slicer. I printed it facing down, and later post processed it with some sanding, filler primer and black matte paint. I'm planning on doing them with the graphs for each button (filled with milky epoxy), but need some testing still.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Button cap replacement for Volkswagen Climatronic used in the MK4 Golf/Bora/Jetta (maybe Passat and others from the era). Print on the desired orientation, but depending on it, you will have to use supports or adjust the shrinkage factor on your slicer. I printed it facing down, and later post processed it with some sanding, filler primer and black matte paint. I'm planning on doing them with the graphs for each button (filled with milky epoxy), but need some testing still.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed