Instrument Cluster Sel/trip Button
1999-2003 Honda S2000 AP1
Description
Replacement for the now long discontinued Cluster SEL TRIP button part number 78180-S2A-003 https://www.buymeacoffee.com/jhc89 Printed button side up with snug supports touching build plate only and carefully removed with flush cutters and fine scissors. I started by copying the dimensions from my old and tattered factory rubber button and made about 20 iterative revisions until the buttons fit the holes with enough tolerance to function. Used print settings on this page: https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/benchy-in-tpu/#:~:text=The%20Bridge%20Flow%20ratio%20is,distance%20is%20decreased%20so%20much.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Replacement for the now long discontinued Cluster SEL TRIP button part number 78180-S2A-003 https://www.buymeacoffee.com/jhc89 Printed button side up with snug supports touching build plate only and carefully removed with flush cutters and fine scissors. I started by copying the dimensions from my old and tattered factory rubber button and made about 20 iterative revisions until the buttons fit the holes with enough tolerance to function. Used print settings on this page: https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/benchy-in-tpu/#:~:text=The%20Bridge%20Flow%20ratio%20is,distance%20is%20decreased%20so%20much.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed