Cargo Cover Catch
1999 Subaru Legacy Outback
Description
Based on pquijal's Thing but basically remade. Not perfect but fits and functions, popped right into my '99 Legacy Outback and should fit and work fine in all related models of Subaru. Used the original screws, no idea what to do if yours are missing. STEP file included if anyone wants to refine this further. My print looks a little rough because I used a "draft mode" slicer profile, since function matters to me more than cosmetics on this. I printed with the end of the square nub on the build plate so the support interface surfaces are all hidden when installed in the car. This is only for the RH side, mirror in your slicer for LH use.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Based on pquijal's Thing but basically remade. Not perfect but fits and functions, popped right into my '99 Legacy Outback and should fit and work fine in all related models of Subaru. Used the original screws, no idea what to do if yours are missing. STEP file included if anyone wants to refine this further. My print looks a little rough because I used a "draft mode" slicer profile, since function matters to me more than cosmetics on this. I printed with the end of the square nub on the build plate so the support interface surfaces are all hidden when installed in the car. This is only for the RH side, mirror in your slicer for LH use.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed