Parcel Shelf String Anchor
Description
This is an anchor for the OE retractable strings on the trunk cover of VW Golf/GTI (and maybe Jetta, Passat, Bora, etc.) from 1999 to 2005 (Mk4). These fit into the recess where the original mount broke off. Recommend printing these in the orientation shown in the pictures, using a high-strength plastic, at 90% infill density (don't be fooled, 100% infill makes bad parts) for best strength. It's a little bit of a tight fit, but if your printer's dialed in then these should snap into place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is an anchor for the OE retractable strings on the trunk cover of VW Golf/GTI (and maybe Jetta, Passat, Bora, etc.) from 1999 to 2005 (Mk4). These fit into the recess where the original mount broke off. Recommend printing these in the orientation shown in the pictures, using a high-strength plastic, at 90% infill density (don't be fooled, 100% infill makes bad parts) for best strength. It's a little bit of a tight fit, but if your printer's dialed in then these should snap into place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed