Cup Holder
1999-2005 Volkswagen Jetta Mk4
Description
Updated: Found an issue with the holder being thin enough that it would bend in heat of the car. I made it thicker and uploaded it as Version2. This is a cupholder replacement for the pop out cupholder in the center console. The one that was in there had broken, and all parts had come out. The only thing left was the small spring parts in the back. I decided to replace it with something that I could print. The printed version would great, it is tight in the slot and holds even a large drink (although I probably wouldn't recommend most large cups) and it will come out and can be dropped into the glove box or out of the way if not being used.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Updated: Found an issue with the holder being thin enough that it would bend in heat of the car. I made it thicker and uploaded it as Version2. This is a cupholder replacement for the pop out cupholder in the center console. The one that was in there had broken, and all parts had come out. The only thing left was the small spring parts in the back. I decided to replace it with something that I could print. The printed version would great, it is tight in the slot and holds even a large drink (although I probably wouldn't recommend most large cups) and it will come out and can be dropped into the glove box or out of the way if not being used.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed