Rear View Mirror Adapter
2000-2009 Honda S2000 AP1/AP2
Description
NOTE: This STL file for this part was updated (03-20-2022) to reflect some minor improvements to the overall design. This is an adapter that allows the factory S2000 rear view mirror mount to work with an optional full display dimming rear view mirror from '20-'22 ZL1 LT4 Camaro. This mirror installation is intended to assist with parking and does not provide a good angle (camera is mounted too low) for full time use while driving. Some modifications to the mirror itself are required for this mount to work. Modifications include trimming/grinding,drilling surrounding plastic and rerouting wires. The upper edge of the rear cover sits slights proud of the surrounding area, but will still remain securely attached. The two mirror views shows the view with the digital tilt set to the highest and lowest settings.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
NOTE: This STL file for this part was updated (03-20-2022) to reflect some minor improvements to the overall design. This is an adapter that allows the factory S2000 rear view mirror mount to work with an optional full display dimming rear view mirror from '20-'22 ZL1 LT4 Camaro. This mirror installation is intended to assist with parking and does not provide a good angle (camera is mounted too low) for full time use while driving. Some modifications to the mirror itself are required for this mount to work. Modifications include trimming/grinding,drilling surrounding plastic and rerouting wires. The upper edge of the rear cover sits slights proud of the surrounding area, but will still remain securely attached. The two mirror views shows the view with the digital tilt set to the highest and lowest settings.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed