Arm Rest Cup Holder
2000 Mazda Mx-5 Miata NB
Description
**Printer brand:** Sovol **Printer:** Sovol SV08 **Resolution:** 0.25 mm layer height **Infill:** 50 percent gyroid **Filament:** Sovol PETG **Nozzle temperature:** 255 C **Bed temperature:** 80 C **Supports:** Yes, on build plate only **Rafts:** No Printed on a Sovol SV08 in Sovol PETG. I have a 2000 NB Miata and really liked the original design, so I remixed it to fit the NB. The keyhole for the retaining clip sits a little high on my console, so I used a strip of the hook side of hook and loop tape to keep it snug and firmly in place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
**Printer brand:** Sovol **Printer:** Sovol SV08 **Resolution:** 0.25 mm layer height **Infill:** 50 percent gyroid **Filament:** Sovol PETG **Nozzle temperature:** 255 C **Bed temperature:** 80 C **Supports:** Yes, on build plate only **Rafts:** No Printed on a Sovol SV08 in Sovol PETG. I have a 2000 NB Miata and really liked the original design, so I remixed it to fit the NB. The keyhole for the retaining clip sits a little high on my console, so I used a strip of the hook side of hook and loop tape to keep it snug and firmly in place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed