Glove Box Hinge
2001-2005 Audi A4 B6
May 5, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Known problem on the Audi A4 B6, the glove box hinge breaks. This part can fix it. Remove the glove box lid and sand the hinge on the lid flat. Drill a hole with an 11-12mm drill bit (if necessary, widen it a little with a Dremel). Glue in with sufficient two-component adhesive.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Known problem on the Audi A4 B6, the glove box hinge breaks. This part can fix it. Remove the glove box lid and sand the hinge on the lid flat. Drill a hole with an 11-12mm drill bit (if necessary, widen it a little with a Dremel). Glue in with sufficient two-component adhesive.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed