Glovebox Hinge
2001 Dodge Ram 2500
Description
I whipped this up to replace glovebox hinges on a 2001 Dodge Ram. It's not perfect and not exact but should do the job. Ignore the hole placement as you'll have to fiddle around with it a lot to get them to line up correctly. You will have to drill your own holes or slots in this print to be able to move them around to the appropriate spot. You will need to cut away your broken or old hinges and any surrounding material to make space for these and use the screws above them (Add a Washer!) Print them at 100% Infill for extra strength.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I whipped this up to replace glovebox hinges on a 2001 Dodge Ram. It's not perfect and not exact but should do the job. Ignore the hole placement as you'll have to fiddle around with it a lot to get them to line up correctly. You will have to drill your own holes or slots in this print to be able to move them around to the appropriate spot. You will need to cut away your broken or old hinges and any surrounding material to make space for these and use the screws above them (Add a Washer!) Print them at 100% Infill for extra strength.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed