Parking/turn Lamp Grommet Clip
2001 Ford Sport Trac
Description
This design is for the little clips that go over your Ford's turning/parking light bulb's locating pins. These grommets then snap into two holes that secure the bottom of the lamp assembly to the chassis. Essentially, this is the part here: https://www.amazon.com/Ford-Park-Signal-Grommets-Diameter/dp/B004E6A1XW I needed two of these to fix my 2001 Sport Trac, and rather than pay for them and shipping, I designed them myself. Hopefully they are of use to someone else. I printed these out at 1:1 scale, and they fit just fine. You may need to adjust the scale depending on your printer. Head diameter (the flat face you should be printing parallel to the bed) is 13mm, if that helps. I have only tested this on my 2001 Sport Trac, but it should work for most Ford vehicles. I am not a car person, so please let me know if I am wrong! From the part information page: "Replaces Ford: N811169S,W705550-S300 F250 - F550 Trucks 1999 -; Toyota: 90075-10801,90189-06111"
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This design is for the little clips that go over your Ford's turning/parking light bulb's locating pins. These grommets then snap into two holes that secure the bottom of the lamp assembly to the chassis. Essentially, this is the part here: https://www.amazon.com/Ford-Park-Signal-Grommets-Diameter/dp/B004E6A1XW I needed two of these to fix my 2001 Sport Trac, and rather than pay for them and shipping, I designed them myself. Hopefully they are of use to someone else. I printed these out at 1:1 scale, and they fit just fine. You may need to adjust the scale depending on your printer. Head diameter (the flat face you should be printing parallel to the bed) is 13mm, if that helps. I have only tested this on my 2001 Sport Trac, but it should work for most Ford vehicles. I am not a car person, so please let me know if I am wrong! From the part information page: "Replaces Ford: N811169S,W705550-S300 F250 - F550 Trucks 1999 -; Toyota: 90075-10801,90189-06111"
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed