Front License Plate Holder
2001-2005 Mazda Mx-5 Miata NB FL
Description
Here is a license plate holder for the MX-5 NB FL. I think it also fits the NB. There are two ways to mount the holder. 1. By screw through the bumper. 2. By magnet. For this you can glue magnets with a diameter of 15mm and a height of 5mm into the recesses. Then glue the magnets inside the bumper as well. After that the holder should hold by magnet and be removable again. I have not tested this version yet. But I am happy about feedback. If you want to modify the holder, feel free to do so. For this case I have also uploaded an STP file :) Material: PLA Nozzle: 0.4mm Wall thickness: 2 lines Layer thickness: 0.3mm Infill: 15% Support: Yes (for the holes)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Here is a license plate holder for the MX-5 NB FL. I think it also fits the NB. There are two ways to mount the holder. 1. By screw through the bumper. 2. By magnet. For this you can glue magnets with a diameter of 15mm and a height of 5mm into the recesses. Then glue the magnets inside the bumper as well. After that the holder should hold by magnet and be removable again. I have not tested this version yet. But I am happy about feedback. If you want to modify the holder, feel free to do so. For this case I have also uploaded an STP file :) Material: PLA Nozzle: 0.4mm Wall thickness: 2 lines Layer thickness: 0.3mm Infill: 15% Support: Yes (for the holes)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed