Rear Cupholder Adapter
2001-2006 Mini Cooper R50
Description
This adapter converts the rear cupholder for a 2003 mini cooper from a 65mm x 70mm (diameter x height) cupholder to a 100mm cupholder to hold a larger water bottle. *** 06/05/2025 V1: Just sketched and extruded rough outline for the shape; I need to measure the actual sizes and adjust. 11/07/2025 V2: Changed bottle from 100mm to 110mm. Changed lower half diameter from 60mm to 65mm. 15/07/2025 V2.1: Decreased cupholder height to 65mm. 16/07/2025 V2.2: Decreased cupholder height to 61mm. Increased cupholder thickness from 3mm to 5mm as I was concerned it wouldnt be strong enough for big bottles. 18/07/2025 V2.3: Added Chamfer to cupholder bottom
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This adapter converts the rear cupholder for a 2003 mini cooper from a 65mm x 70mm (diameter x height) cupholder to a 100mm cupholder to hold a larger water bottle. *** 06/05/2025 V1: Just sketched and extruded rough outline for the shape; I need to measure the actual sizes and adjust. 11/07/2025 V2: Changed bottle from 100mm to 110mm. Changed lower half diameter from 60mm to 65mm. 15/07/2025 V2.1: Decreased cupholder height to 65mm. 16/07/2025 V2.2: Decreased cupholder height to 61mm. Increased cupholder thickness from 3mm to 5mm as I was concerned it wouldnt be strong enough for big bottles. 18/07/2025 V2.3: Added Chamfer to cupholder bottom
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed